Resistance furnace petroleum ash
automatically maintain a constant temperature furnace temp
GB/T508
North Dalian
Port: Dalian port or other port
Minimum Order Quantity: 1 Set/Sets Discussible
Supply Ability: 300 Set/Sets per Month Discussible
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram,Discussible
Contact SupplierPackaging Detail: Treated Wooden Packaging.According to the request of export.
Delivery Detail: According to your request and the actual situation
Measuring ash petroleum products(Resistance furnace)
1.Technical parameters
Heating power | 4000W |
Rated Voltage | AC220V/50Hz |
Furnace Size | 300 × 200 × 120 |
Quantitative filter paper | 9cm |
Porcelain crucible | 50ml |
2.Performance characteristics
Muffle furnace and the standard configuration
3.Applicable standards
Apparatus for the determination of the ash content of petroleum products, in accordance with the design and manufacture of GB/T508, ash-free filter paper used for the core fire lit on an appropriate sample containers to make it to the rest of the combustion of carbon, carbon residue and then 775 high temperature in the heating furnace ashes into points, and then cooling and weighing.
4.Structural characteristics
The apparatus mainly by high-temperature furnaces, temperature controller, ceramic crucible, quantitative filter paper, iron crucible, dryers, etc..
Temperature controller which can be the temperature of the furnace to measure, display, control, so that automatically maintain a constant temperature furnace temperature, the controller shows that the use of indicators is also equipped with ammeter, intuitive ease of use. To electric heating elements for, the furnace heating temperature range of ~ 1000 .
5.Apparatus Principle
Ash can be used as washing oil refining check whether the normal indicators, such as acid-base refining, the slag is not completely off, then the residual category of salts and soap so that ash increased.
Heavy fuel oil, such as too much ash, ash deposited on the wall, steam superheater, fuel and air preheater on, not only to reduce heat transfer efficiency, but also may cause damage to equipment in advance.
If diesel fuel ash, and ash into the increase in carbon deposition of hard carbon, making the cylinder liners and piston ring wear and tear increases.
Before and after the adoption of lubricant additives increase the determination of the ash may be an indirect indication of clean dispersant, antioxidant, antisepticmetal salts of the addition of additives.
Contact:
Mobile:(0086)13942632309
Tel:(0086)411-84754555-801
Fax:(0086)411-84753759