large-screen touch-screen display
advance artificial intelligence control algorithm
wide switching power supply
Port: Shanghai
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Month 1
Payment Terms: T/T
Contact SupplierPackaging Detail: box
Delivery Detail: 1day
1. INTRODUCTION
2. TECHNICAL SPECIFICATION
3. FRONT PANEL
4. OPERATION DESCRIPTION
5. Accessories and wiring:
As shown in accordance with, the corresponding cable to the corresponding position, lamp 1 and lamp 2 can be confusing connections
Note:
Display behind the structure:
The power cord plug (we supply two different plugs):
The special remote control of aquarium controller(need a battery ,about 9V)
Features:
10 meters of barrier-free wireless remote control
Components: a remote control
Functions: lighting control, sterilization (UV light), pump 1, and pump 2, the oxygen pump switch;
Tips: If the remote control distances close and the lights became dim, we advise you to change the battery.
The photo of battery(please buy it by yourself,remember that 9V)
Wiring:
5. Mode:Manual mode and Automatic mode
Manual mode: All control is manual in addition to temperature control and doesn't run by time. In addition to heating and cooling relays, the other relays each power up is turned off by default.
All through the time control system functions are controlled manually, not by time to run. Without time control function, but also the factory default parameter values, if the factory defaults parameter values are unsuitable, but can be reset.
Automatic mode:
Lamp 1 turn-on time: 7:00 Light 1 turn-off time: 18:00
Light 2 turn-on time: 7:00 Light 2 turn-off time: 18:00
UV turn-on time: 7:00 UV turn-off time: 17:00.
Water Pump time: 24 hours continuous operation
Oxygen time: 24 hours continuous operation
Note: Data of many parameters for the standard mode are fixed, so the items needed to be set are relatively small.
The turn-on and turn-off of many functions for manual mode are manually operating, so the items needed to be set are relatively small.
during setting if there is no button operation for 10 seconds, it will automatically save the data has been set and exit setup.
Choose to run the tank model is based on programmed, the system default is ten hours, if more than this time and no one operation (manual mode), the system according to automatic mode.
6. Temperature control mode:
Heating rods: When the actual temperature "Settings value of 1 degree C, the temperature control relay, the heating rods began to heat up. Actual temperature> set value, the temperature control relay bounce, heating rods stop heating. (Such as setting the water temperature is 30.0 degree C, <29.0 degree C temperature relay,> 30.0 degree C temperature relay bounce.)
7. NOTE:
8. Packing list items:
Touch screen: 1
Socket and accessories: 1 (just like what you see in the picture.)
Remote control: 1 (without the battery.)