Adhesive Tape retentivity tester
1.SUS#304 stainless steel
2.Temp. range: -20-150 (centigrade)
3.Standards: IEC68-2-30
Port: SHENZHEN
Minimum Order Quantity: 1 Set/Sets OEM service offered
Supply Ability: 50 Set/Sets per Month OEM service offered
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: strong wooden case
Delivery Detail: 15 days after order
Adhesive Tape retentivity tester
It is mainly to test the adhesive resistance property and the holding adhesive property of the pressure sensitive tape. The static loading test: paste the tape to the testing board, timing for a period, and evaluate the holding adhesion property according to the distance the tape slips or the time it takes. This machine can simulate high temperature and high humidity/high temperature and low humidity/low temperature and high humidity/low temperature and low humidity conditions. High standard procedure and control system are attached for good testing environment.
Adhesive Tape retentivity tester
The Main Technical Parameters:
Material: SUS#304 stainless steel board for inner part, and advanced paint coated for outside
Heat preservation material: fine glass silk + PU foam
Thickness of the steel board: 1.5mm-2.0mm
Width: 40-50 mm
Length: 60-125mm
Temperature range: -20°c--150°c
Humidity range: 20%RH-98%RH
Load: 1KG
Precise:±0.5°c, ±2.5%RH( should be measured 30 minutes after the sensor is stable)
Uniformity: ±0.5°c-±2.0 °c; ±3%RH (should be measured at the position 1/6 away from the wall and 30 minutes after the sensor is stable)