Constant Tempretue Humidity Tape Persistence tester
1.Tape adhessive testing device
2.Temp. range: -20-150 (centigrade)
Port: SHENZHEN
Minimum Order Quantity: 1 Set/Sets OEM service offered
Supply Ability: 50 Set/Sets per Month OEM service offered
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: strong wooden case
Delivery Detail: 15 days after order
Tape persistence tester is mainly used to test the adhesive resistance property and the holding adhesive property of the pressure sensitive tape. The static loading test: paste the tape to the testing board, timing for a period, and evaluate the halding adhsion property according to the distance the tape slips or the time it takes. This machine can simulate high temperature and high humidity/high temperature and low humidity/low temperature and high humidity/low temperature and low humidity conditions. High standard procedure and control system are attached for good testing environment.
Tape Persistence Tester
The Main Technical Parameters
Material | SUS#304 stainless steel board for inner part, and advanced paint coated for outside |
Heat preservation material | fine glass silk + PU foam |
Thickness of the steel board | 1.5mm-2.0mm |
Width | 40-50 mm |
Length | 60-125mm |
Temperature range | -20° c--150° c |
Humidity range | 20%RH-98%RH |
Load | 1KG |
Precise | ± 0.5° c, ± 2.5%RH( should be measured 30 minutes after the sensor is stable) |
Uniformity | ± 0.5° c-± 2.0 ° c; ± 3%RH (should be measured at the position 1/6 away from the wall and 30 minutes after the sensor is stable) |