1.Certificate:CE&ATEX
2.High temp:up to 250
3.Large pipe sewage measurement
4.Low flow measure:0.05m/s
5.Hot-tapped install
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 500 Set/Sets per Month
Payment Terms: T/T
Contact SupplierPackaging Detail: Carton as per export standard
Delivery Detail: Within 7 workdays
Principle of Measurement
The Doppler ultrasonic flow meter is designed to measure volumetric flow of liquid within closed conduit, the pipe line must be filled full of liquids, there must be Ta certain amount ofT air bubbles or suspended solids in liquid.
Transducers are clamp-on or hot-tapped probe types, user don’t need to shut down the pipe flow when install the clamp-on transducers.
The flow meter operates by transmitting an ultrasonic sound from its transmitting transducer, the sound will be reflected by useful sonic reflectors suspended within the liquid and recorded by the receiving transducer. If the sonic reflectors are moving within the sound transmission path, sound waves will be reflected at a frequency shifted (Doppler frequency) from the transmitted frequency. The shift in frequency will be directly related to the speed of the moving particle or bubble. This shift in frequency is interpreted by the instrument and converted to various user defined measuring units.
There must be some particles large enough to cause longitudinal reflection – particles larger than 100 micron.
When install the transducers, the installation location must have enough straight pipe length upstream and downstream. Commonly, the upstream needs 10D and downstream needs 5D straight pipe length, where D is pipe diameter.
Series DMTF-Ex Doppler ultrasonic flow meter is designed to measure volumetric flow of liquid within closed conduit, the pipe line must be filled full of liquids, there must be Ta certain amount ofT air bubbles or suspended solids in liquid.
The Doppler ultrasonic flow meter can display flow velocity, flow rate and flow totalizer, etc, and is configured with 4-20mA, Totalizer Pulse and Relay Alarm output.
Features:
Approvals:II2G, ExdIIBT6, LCIE 09 ATEX 3088
Solutions:
For petrochemical plant and oil field, oily wastewater discharge, wastewater, sewage, oil drilling slurry, or all explosion-proof occasion of flow monitoring and measurement.
When installing insertion transducer, Hot-tapped installation and demounted online, do not need to shut down the pipe flow when install the transducers.
When installing insertion transducer, the pipe can’t be welded directly, such as cement pipe, ductile iron or other unweldable material, please notify manufacturer for extended transducers
(wall thickness of pipe can be up to 110mm). In this case, it also need to install a weldable (usually carbon steel) hoop shown as below.
Specifications:
CE Certificate of the Doppler ultrasonic flow meter