AJWG Series Gas Turbine Flow Meter - AJWG Series

AJWG Series Gas Turbine Flow Meter

Features

-Patented rectifier technology can be installed conditions are not ideal, medium flow rate case of relatively large to maintain the reliability of measurement.

-Patent dust structure can effectively prevent the medium of impurities into the bearing caused by the rapid wear and tear, stuck phenomenon.

-Installation requirements low, the former straight pipe ≥ 2D, will be able to ensure that the flow meter measurement accuracy.

-Aluminum turbine, high strength, corrosion resistance, anti-aging, long life, high accuracy and good repeatability.

-Advanced computer technology and high-performance microcontroller, so that machine more powerful and better performance.

-Intelligent design can be integrated dynamically detect medium temperature and pressure, and compression factor for automatic compensation and amendments to the standard instantaneous direct display of gas flow and the standard volume of the total volume.

-Using RS485, RS232C, MODBUS agreements with private MODEM supporting, through the telephone network to build automated meter reading management system, high degree of automation.

Specifications

Conditions of Use

Ambient temperature: -30 °C - +60 °C

Medium temperature: -40 °C - +85 °C

Relative humidity: 5% ~ 95%

Atmospheric pressure: 70kPa ~ 106kPa

DN

DN25-DN400, if there are special requirements, could provide a larger diameter of the flowmeter.

PN

1-4Mpa, if there are special requirements, could provide a larger pressure flowmeter.

Accuracy

± 10% (Qmin ~ 0.2Qmax ± 2.0%: 0.2Qmsx-Qmax ± 1.0%)

± 15% (Qmin ~ 0.2Qmax ± 3.0%: 0.2Qmax-Qmax ± 1.5%)

Repeatability

Better than 0.2%

Explosion-proof grade

ExdllBT4, ExiallBT4

Protection Level

IP65