AFV Series Portable Ultrasonic Flow Meter/AFV-300 - AFV-300

AFV Series Portable Ultrasonic Flow Meter/AFV-300

1.ATEX -Certificate
2.High temperature:up to 280 centigrade
3.Easy installation
4.Low flow rate measurement
5.High accuracy.

Explosion-proof Doppler Flow meters measure solids-bearing or aerated liquids in metal or plastic pipes. Proprietary circuitry allows this instrument to operate with lower concentrations of suspended solids than any competitive Doppler flow meter--expanding the instrument's range of applications and reliability. Clamp-on transducers permit the instrument to be installed in minutes without interrupting system pressure or flow.

In addition, no pressure head-loss is created; therefore system pump horsepower requirements are reduced. The DMDF transmitter has a full keypad designed for simple field setup and application versatility. The four-line, backlit, alphanumeric display shows instantaneous flow rate and totalized flows in a variety of user selectable engineering units.

The Clamp-on, non-contacting transducers are strapped to the outside of a pipe and are suitable for most installations where the pipe material supports the transmission of ultrasound.

Features:

1.Suitable to measure the flow of solids-bearing or aerated liquid within closed conduit

2.Automatically signal gain adjustment

3.Don't need to shut down the pipe .

4.Flow on when install the transducers.

5.User-friendly configurations.

6.4-20mA and totalizer pulse output

7.Accuracy: 2.0% Calibrated span

Main advantages:

1.Measurable to fluid of very low flow rate, low to 0.10FPS (0.03M/S).

2.Non-invasive, Standard transducer fit to 1~160 inches (DN25~4064MM), Round-Hoop type, 1/2~2 inches available.

3.Standard temperature transducer :-40~+120 °C;

4.Magnetic force mounting type transducers also is available.

5.High temperature transducer :-40~+280 °C

Applications:

1.Waste water

2.Sewage,

3.Paper pulp,

4.Ore pulp,

5.Effluent,

6.HVAC,etc.