ash fusibility tester
Loading samples at ambient temperature
Automatic image recording
Automatic identifying test result
Port: China Main ports
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 10 Set/Sets per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: Plywood cases, suitable for long distance delivery.
Delivery Detail: Within three weeks after the payment
ash fusibility tester
Applicable Scope:
It is applicable for measurement fusibility of coal ash.
Quality Certification:
ISO540:2008 Hard Coal and Coke-Determination of ash fusibility
ASTM D1857-04 Standard Tester Method for fusibility of coal and coke ash
GB/T2191996 Determination of fusibility of coal ash.
Standard layout: SDAF105 mainframe, Lenovo computer, laser printer
Technical parameter:
Temperature Control Range | Room Temperature~1600oC | Resolution Response | 1oC |
Heating Rate | <900oC(15--20)/min >900oC(5±1)/min | Temperature-controlled Precision | <5oC |
Test atmosphere | Reducing or Oxidizing | Max Power | 2.4kW |
Sample Numbers | 9 | Voltage | AC220±10% 50Hz±1Hz |
Net Weight | 80kg |
Main features:
1. High automation
Automatically sending the cone support under ambient temperature.
Automatically identifying four characteristic temperatures.
2. More sample loading
Up to 9 samples can be loaded once.
3. Real-time monitor test process
Equipped with CCD camera technology, the whole test process will be monitored in real time; the images will be shown on the computer screen and stored.
4. Accurate test result
HD colour camera makes the images clearer, thus the identification of characteristic temperature can be more accurate.
5. Recheck the test result available
On completion of the test, the stored image can be replayed for finding the characteristic temperature manually.
6. Precisely controlled furnace temperature
7. Low gas consumption
8. Easy to operate and handle
a) Easy to use Windows-based operating software.
b) Easy data handling, real time data can be transmitted through internal network.
c) CAN bus interface, several ash fusion testers can be controlled by a single PC.