Product Features:
675 Clamp-On Meters
Business Terms:
Contact Supplier
675 Clamp-On Meters
Manufacturer's Link: http://www.aemc.com/search/index.asp?mn=Search&modelnumber=2117.50&mnsub=Go
Updated Operating Temperature Specification:
-14° to 122°F (-25 to 50°C), 80% RH, non-condensing
The AEMC? Clamp-on Meter Model 675 is a general purpose professional clamp-on meter that measures up to the toughest standards. This meter offers a complete set of measurement ranges (AC Amps, DC Amps, AC Volts, DC Volts, Ohms, Continuity with beeper, Frequency from V or A, and Temperature) and is in compliance with international safety and quality standards to ensure professional and reliable measuring tools.
This meter is designed to measure and display amps and volts at the same time. It also is auto-ranging and provides the best measurement range and resolution for troubleshooting.
The Model 675 is sized for comfortable, one-handed operation. The tapered and hooked jaw design facilitates maneuvering in crowded wiring and breaker panels, making it easy to select conductors. The jaw opening accommodates one 750kcmil cable or two 350kcmil cables. The large and easy-to-read 9999-count LCD features comprehensive user information symbols, such as low battery, polarity, overload, and an analog bargraph for easy trend readings. The Model 675 is equipped with a Data Hold function that freezes the measurement for later viewing, Min/Max, and Peak function for capture of signals. This Model 675 is a True RMS clamp-on meter that provides RMS measurements for today's non-linear electrical environments.
Features
Applications
Model No.: DM3-W
Features: 1.watt meter
2.analog output DC4-20mA for selection
3.display range:0-9999
4.red LED display
Model No.: RNO2002
Features: Fusion splicer
1. Simultaneous X and Y views
2. 9 Sec. splice time, 40 Sec.
3. auto check fiber end face
Model No.: DTS-353 (prepaid meter)
Features: We design and produce three phase prepaid digital power meter, with IC card, CPU card and different meter cases.
Model No.: GDBC-II
Features: GDBC-II Full-automatic Transformation Ratio Meter is a automatic instrumentation to test the Transformation Ratio
Model No.: DM3-W
Features: 1)Power meter
2)Wattmeter
3)Digital wattmeter
4)Large LED display
5)ISO9001:2000
Model No.:
Features: 3 phase kwh meter module,rs485 data module,circuit board
Model No.: DW series
Features: Electric Meter
Design service offer
single&3 phase
RMS value display,C/T settable
Up to 3 alarm,8 segments output control
Model No.: GDGS
Features: GDGS Different Frequency Automatic Dielectric Loss Tester / power factor tester/transition resistance tester
Model No.:
Features:
Model No.: MPM8000S-08-02-06
Features: 1,can measureand analyze power parameters such as
U,I,In,F ,S,P,Q,PF,kWh,kvarh etc.
2RS-485 communication
3Max/min datarecord
Model No.:
Features:
Model No.: SD-96 L KW
Features: 96 240 degree Wattmeter
Three phase three wire
Three phase four wire
Accuray:class1.5