8"/200mm Electronic Digital Vernier Calipers for measuring (E002) - E002

1.Measuring Range: 0-200mm/0~8 in, 2.Material:stainless steel (4cr13), 3.Four-way measurements, 4.certificate:CE, 5.Display: LCD - more info check here: http://www.buymeasuringtools.com/8-200mm-Electronic-Digital-Vernier-Calipers-for-measuring-E002-10254313/

Quick Brief

Place of Origin: Zhejiang China (Mainland) Brand Name: JIANYU Model Number: E002 caliper material: stainless steel(4cr13) display material: LCD screen+ABS caliper length: 29 cm specification: digital caliper certificate: CE per package: plastic box measuring range: 8"/200mm

Specifications and Product Details:

8"/200mm Electronic Digital Vernier Calipers(E002)

•SPECIFICATIONS

1.caliper length:29cm

2.N/G.W: 0.45 kg

3.material:stainless steel(4cr13)

4.package:plastic casing or blister with paper card or according to your requirements.

5.plastic box packing details:

quantity in per carton	N.W/G.W	carton size
50pcs	23/25kg	553330cm

•TECHNICAL SPECIFICATIONS

1.Outside Jaws: Measure External Length

2.Inside Jaws: Measure Internal Length

3.Measuring Range: 0-150mm/0-6in, 0~200mm/ 0~8 in

4.Resolution: 0.01mm/ 0.0005in

5.Accuracy: ± 0.02mm/ 0.001in (<100mm)

±0.03mm/0.001in(>100-200mm)

6.Repeatability: 0.01mm / 0.0005in

7.Max Measuring Speed: 1.5m/sec, 60in/sec

8.Measuring System: Linear Capacitance measuring system

9.Display: LCD Screen

10.Construction Material: Stainless Steel

11.Power: One alkaline lithium button cell battery 1.5v,TYPE LR44.

Capacity-180MAH

12.Working Temperature: 5°c-40°c/41 to 104 degree F

•APPLICATIONS

1.Operation : slider can be removed only after the locking screw (#10) is loosened.

2.Basic measuring methods :

1) loosen the locking screw

2) Press "ON " button, select sae or metric measurement by pressing "MM/INCH" button.

Pressing "MM/INCH" button after measurement will display the sae / metric conversion.

3)To reset display to zero, close external measuring jaws, then press "ZERO" button.

•MAINTENANCE INSTRUCTIONS

1. Keep the calliper clean and dry (liquid can damage the slider)

2. Use a clean, dry cloth to clean all surfaces -do not use solvents or solvent based cleaners.

3. To save power, turn off the unit when not in use.

Avoid contact with electricty and /or electronic devices

•BATTERY REPLACEMENT

Flashing display indicates low battery. To replace battery, remove battery cover by sliding cover in

the direction indicated and replace battery with positive side facing out.

•TROUBLE SHOOTING

Falure	Cause	Measure
Display flashes	Low battery	Replace battery
Display does not change when slider is moved	System locked	Remove battery and replace after 30 seconds to reset system
Accuracy less than +/-0.001mm	Dirt in the sensor	Remove slider cover and its assembly clean with compress air 5kgs/cm2
No display on LCD	1. improper battery position 2. Low battery	1. Remove battery cover and check battery position 2. Replace battery.