1:Case: SUS304
2:Movement: Brass or SUS304
3:Thread: Brass or stainless steel
4: Dial and pointer: Aluminum
Port: main port in China
Minimum Order Quantity: 100 Piece/Pieces
Supply Ability: 40,000 Piece/Pieces per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: Every piece in one box then several dozens in a carton.And we also can do specific packing if you need.
Delivery Detail: 15days after
CAPSULE PRESSRE GAUGE
Feature:
Capsule Pressure Gauge measures the pressure, especially micro pressure and negative pressure of gas, mainly used for gas pipeline, combustor and some other similar equipments.
Specifications:
1.Type:YEF
2.Accuracy:Normal Grade 2.5
3.Diameter of outside:60mm=2.5'',100mm=4'',150mm=6''.Otherwise,we can do special size you need.
4.Measure range:From -12 to 60Kpa
5.Installation:Bottom connection
6.Thread:BSP,NPT,BS,UNand other special specification
7.Temperature:-10~70°C
8.Certification:ISO9001:2008
9.Sealgauge Diaphragm Pressure Gauge
10.Dial plate:Single and dual scale (psi, kpa, mpa, bar, kg/cm2) available
Material:
| Part | Case | Bourdon Tube | Movemnet | Thread | Point | Diaphragm |
| Material | SUS304 stainless steel | SUS316L stainless steel, Brass or bronze | SUS316L stainless steel | SUS316L stianless steel | Aluminum | SUS316L stianless steel |
Attention:In the measurement instruments, shall not exceed the load measurement limit 3/4
Model No.: FG
Features: 1.High precision
2..Double axis
3.Small in volume
4.Four grids
Model No.: WHT-17
Features: Combined temperature/pressure Boiler Gauge
1.Dial Size:84mm
2.Conn.:Bottom with self closing valve
3.Case Material: Steel
Model No.: DC142-342
Features: Digital vernier calipers micrometer. micrometer calipers.
Electric calipers, digital vernier caliper, vernier caliper,
Model No.:
Features: Stainless steel pressure gauge
high quality and low price
Model No.:
Features: High resolution:0.05
Locking handle locks miter head securely in position
Model No.:
Features: FEATURES
Power on/off
Zero-setting at any position
Model No.: 8810
Features: Thickness meter is Used for measuring thickness and corrosion of pressure vessels, chemical equipment etc
Model No.: DG-100
Features: Thread Depth Gauge DG-100
Model No.: ETA-068F
Features: Coating Thickness Meter
Model No.: ETA-0682
Features: Coating Thickness Meter
Model No.: V1
Features: Feature:The fine Greatsun's vernier calipers for accurate work .
ALL Measuring face is hardened and finished .
Model No.: DT-9860/9861/9862
Features: *USB interface
*Readings memories
*Humidity & Air temperature
*Dewpiont & Wet bulb temperature