1.Measuring Range: 0-150mm/0-6in
2.Material:stainless steel (4cr13)
3.Four-way measurements
4.certificate:CE
5.Display: LCD
Port: Shanghai or Ningbo
Minimum Order Quantity: 1000 Set/Sets
Supply Ability: 70000 Set/Sets per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: outer box size: 48*27*32 cmquantity:50pcsG.W/N.W:19/17 kgs
Delivery Detail: 30 days after deposit receiving.
6"/150mm Electronic Digital Vernier Calipers(E007)
TECHNICAL SPECIFICATIONS
Outside Jaws: Measure External Length
Inside Jaws: Measure Internal Length
Measuring Range: 0-150mm/0-6in, 0~200mm/ 0~8 in
Resolution: 0.01mm/ 0.0005in
Accuracy: ± 0.02mm/ 0.001in (<100mm)
±0.03mm/0.001in(>100-200mm)
Repeatability: 0.01mm / 0.0005in
Max Measuring Speed: 1.5m/sec, 60in/sec
Measuring System: Linear Capacitance measuring system
Display: LCD Screen
Construction Material: Stainless Steel
Power: One alkaline lithium button cell battery 1.5v,TYPE LR44.
Capacity-180MAH
Working Temperature: 5°c-40°c/41 to 104 degree f
Note: Accuracy affected in environments exceeding 80% relative humidity.
APPLICATIONS
1.Operation : slider can be removed only after the locking screw (#10) is loosened.
2.Basic measuring methods :
1) loosen the locking screw
2) Press "ON " button, select sae or metric measurement by pressing "MM/INCH" button.
Pressing "MM/INCH" button after measurement will display the sae / metric conversion.
3) To reset display to zero, close external measuring jaws, then press "ZERO" button.
MAINTENANCE INSTRUCTIONS
1. Keep the calliper clean and dry (liquid can damage the slider)
2. Use a clean, dry cloth to clean all surfaces -do not use solvents or solvent based cleaners.
3. To save power, turn off the unit when not in use.
Avoid contact with electricty and /or electronic devices
BATTERY REPLACEMENT
Flashing display indicates low battery. To replace battery, remove battery cover by sliding cover in
the direction indicated and replace battery with positive side facing out.
TROUBLE SHOOTING
Falure | Cause | Measure |
Display flashes | Low battery | Replace battery |
Display does not change when slider is moved | System locked | Remove battery and replace after 30 seconds to reset system |
Accuracy less than +/-0.001mm | Dirt in the sensor | Remove slider cover and its assembly, clean with compress air 5kgs/cm2 |
No display on LCD | 1. improper battery position 2. Low battery | 1. Remove battery cover and check battery position 2. Replace battery. |
please have a look of our products ,and click our web sit to see more.