2M Digital Transmission Analyzer - E1 Tester

ST350 2M Digital Transmission Analyzer (E1 Tester)

Key Features
1. The large screen with backlighting is displayed in Chinese/English, and the contrast can be adjusted manually. It can be clearly seen even in the burning sun or in the darkness.
2. The complete LED display makes the working state, signal structure and test results of the instrument much clearer.
3. The shortcut function key can be used to transform any menu interfaces at any moment.
4. Digital volume control can monitor any phone at any moment.
5. Soft switch of power supply can realize the functions of timed start and timed test, etc.
6. Clear historical alarm records at any moment
7. Inject outburst error or rate error at any moment
8. Freely run or stop test
9. The display of test setup and test result can be freely transformed.
10. Intuitionist direction keys make setting simple and effective, and can randomly zoom or move the histogram.
11. The built-in high-performance backup battery can successively work for 5 hours when the power is full.
12. We expediently enter into many additional functions with function keys, and can select the needed functions through the concise menu without complex operations.
13. RS232 printing interface can print any single screen result or the whole results.
14. The data port can be transformed into V series interface of various standards and co-directional 64kbit/s interface through proper-matched cable.
15. The side sketch map: Balance and unbalance interfaces can be well used in all kinds of occasions.
16. One key could transmit the Chinese interface to English interface.

Main Functions
1. Out-of-Service measurement
2. In-Service measurement
3. Framing and unframed signal transmit and receiving
4. 2Mbit/s unframed measurement
5. 2Mbit/s framing n*64 Kbit/s measurement
6. Measurement for frame error (FAS ERR), BIT ERR, CRC-4 Error, Code Error (COD ERR), E-bit Error (E-ERR)
7. Clock slip measurement
8. Measurement for signal loss (SIG LOSS), AIS, frames loss (FAS LOSS), pattern loss (PATT LOSS), remote alarm (RA), multi-frame remote alarm (MRA)
9. Line signal frequency measurement
10. Level and frequency measurement of voice channel
11. SMF set and display
12. ABCD set and display
13. Through measurement
14. RT delay measurement
15. Timeslot monitor
16. Three Tx Clock Options (Internal, external, and recover from the received signal)
17. Three Inputs Mode: Terminal, Bridge, Monitor
18. G. 821, G. 826, M. 2100 performance
19. Graphs results of alarm and error
20. RS232 printing
21. Built-in memory prevents data loss when power off
22. Connect to PC
23. 7 setup storages and 436 results storages
24. Bi-directional Listen, dual E1 Measurement
25. Tx Clock offset function
26. Online software update
28. Measurement for co-directional 64k, V. 35 Synchronization
29. Pattern Slip (PAT SLIP) measurement
30. APS (Auto Protect System) Time Measurement
31. Dual-frequency departure measurement