1400C Lab Sintering Vacuum Tube Furnace
1.Chamber size:Dia60x400mm(Dia2.5x16")
2.SiC heating elements
3.Vacuum:0.1Pa
Port: Shanghai/Qingdao/Tianjin
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 100 Set/Sets per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: wooden case lined with plastic paper and flexible foam
Delivery Detail: within 15 days after receiving the remittance
(2500 F) 1400C high Vacuum Lab Sintering Tube Furnace with vacuum 0.1Pa
ST-1400CG Tube Furnace (Heated by SiC elements)
Product Specifications/Features:
Inside Chamber Size:Dia60x400mm(Dia2.5x16")
Standard Working Temperature: 1300 degrees C ( continuous )
Maximum Working Temperature : 1400 degrees C ( < 3 hrs)
Heating Element: SiC heating elements
Max.Vacuum:0.1Pa
ST-1400CG tube furnace is a precision bench-top furnace using quality ceramic SiC rod as heating elements. It is widely used for materials or chemical lab to sinter all types of new materials samples under vacuum or other gases condition. It is controlled by high precision SCR ( Silicon Controlled Rectifier) digital controller with accuracy +/-1.C and 30 segments programmable up to 1400.C.
Detailed Product Description
| Inside Chamber Size | Dia60x400mm(Dia2.5x16") |
| Standard Working Temperature | 1300.C ( continuous ) |
| Maximum Working Temperature | 1400.C ( < 3 hrs) |
| Temperature Control | 30 steps programmable and PID automatic control |
| Heating Rate | 0~10.C / min (suggestion: =< 10.C) |
| Temperature Accuracy | + 1.C |
| Heating Element | SiC heating elements |
| Working Voltage | AC 220V Single Phase 60/50 Hz (or according to your requirement) |
| Thermocouple | S type |
| Max. Vacuum | 0.1Pa |
Standard Sizes:
| Model | Chamber size(DiaxLength) | Maximum Temperature |
| ST-1400CG | Dia50xL300mm(Dia2.0xL12") | 1400C |
| ST-1400CG | Dia50xL400mm(Dia2.0xL16") | 1400C |
| ST-1400CG | Dia60xL300mm(Dia2.5xL12") | 1400C |
| ST-1400CG | Dia60xL400mm(Dia2.5xL16") | 1400C |
| ST-1400CG | Dia80xL300mm(Dia3.2xL12") | 1400C |
| ST-1400CG | Dia80xL400mm(Dia3.2xL16") | 1400C |
| ST-1400CG | Dia100xL400mm(Dia4.0xL16") | 1400C |
| ST-1400CG | Dia150xL400mm(Dia6.0xL16") | 1400C |
| ST-1400CG | Dia200xL400mm(Dia8.0xL16") | 1400C |
Applications:
1.Crystallize;
2.Sintering or Roasting or Forging or calcining;
3.Ashing;
4.Heat treating or Preheating;
5.Quench or Hardening or Austemper
6.Annealing or Tempering or Normalizing
7.melting or smelting
8.Synthesis and degradation or pyrolysis or decomposing
Model No.: GDSD-1B
Features: The instrument is a pocket electric humidity tester used to determine water content of lumber, paper, medicinal herbs etc.
Model No.: GD-0722
Features: 1. Power supply: AC 220V, 50 Hz;
2. Motor power: 0.75 kW;
3. Sample weight: 4.5 kg;
4. Rated speed: not less than 3000 RPM.
Model No.: GDSD-1B
Features: It's used to determine water content of lumber, paper, medicinal herbs, tobacco,cotton,seeds and chemical fiber.
Model No.: GDSD-1B
Features: The instrument is a pocket electric humidity tester used to determine water content of lumber, paper, medicinal herbs etc.
Model No.: DRK123A
Features: DRK123 Box and Carton Testing Machine
carton compression tester
box compression testing machine
corrugated box compression t
Model No.: DRK304A
Features: Oxygen Index Detector ( tester)
It adopts imported high precision sensor: digital display, high precision, good recurrence.
Model No.: DRK113
Features: Paper testing Instruments
Do the ring crush test, carboard's edge crush test, pin adhesive test, flat crush test
Model No.: DRK208
Features: DRK208 MFI Testing Machine
Testing polystyrene,polyethylene,polypropylene,polyamide,fiber resin,acrylate,POM, fluorine etc.
Model No.: DRK104B
Features: Electronic Puncture Strength Tester
Measures the puncture strength required to puncture container board or corrugated board .
Model No.: 113
Features: DRK113 Digital Ring Crush Tester
Digital Ring Crush Tester can do RCT, ECT, PAT, FCT of paper and cardboard
Model No.: 113
Features: Crush Tester for paper and board
It can do RCT, ECT, PAT, FCT of paper and cardboard
Model No.: Gold
Features: GD-270A Dropping Point Tester is used to test the dropping point of lubricating grease,solid hydrocarbon and temperature.