2012 new type inductive moisture test instrument suitable all materials HZ-6613 - HZ-6613

inductive moisture test instrument

Meter Summary:

inductive moisture test instrument is used for measuring moisture content of wood, Timber, paper, Bamboo,

Carton, concrete, metope, and other materials. It applicable of woodwork, paper making, flakeboard, furniture,

building, timber traders and other relevant industry.

1.Features of the inductive moisture test instrument

1.1.It is portable, compact, easy to use and the moisture measurement readings are instant.

1.2.Digital display with back light gives exact and clearly reading although you stay at the somber conditions.

1.3.It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by

moisture whilst in storage, therefore processing will be more convenient and efficient.

1.4.The moisture meter operates by electrical resistance and has automatic temperature compensation.

1.5.Manual off at any time. Auto power off after 5 minutes from last operation.

1.6 Data hold function. Low battery alert.

2.Spesification

Display: 4 digital LCD

Measuring range: 0-99%

Temperature: 0-60°C

Humidity: 5%-100%RH

Resolusion: 0.1

Accuracy: ± 0.5%n

Power supply: 4x1.5 AAA size (UM-4) battery

Dimensions: 140mm×60mm×22mm

Weight: 119g (not including batteries)

Guarantee:3 year

Code choice:20 kinds

3.Operation procedure

3.1 Turn on the power key, the symbol “0”will be showed on display. It will need zeroing if showed other value,

please depress ZERO key while the probe sensor without touch anything, or zeroing is not efficient. Zeroing can

decrease the effect from the temperature and humidity in the air.

3.2 Hold the instrument with your hand, press the back sensor close to the testing material, the reading showed on

display will be the result of the tested material moisture content.(when the back sensor is larger than the testing

material, you can press the sensor aim to the material by its middle of surface.)

3.3 Depress hold key ,the symbol “max”will be showed on display, then the max value must be stored on display

when measuring process. Depress the hold key again,this function will be canceled.

3.4 Code choice. Depress FUN key and not release until the CD00 is showed on display,through press“Δ”and

“Δ↓”key to choose you needed code,then depress FUN key to confirm it.

3.5.Replace batteries. When battery symbol showed on display, it must replace the batteries in time. Slide the

batteries cover,put the batteries into the hole correctly.

4.Warnning setting

4.1 Depressing key 3-9 and don't release until “AL2”showed on display (it will takes 5 seconds to complete

operation),then press “Δ”or “Δ↓” key to choose your suitable value according to your needs, press FUN key

again back to the operation state.

4.2 Setting the “AL1” just the same ways as “AL2”.

4.3 Usually ,“AL2”must larger than “AL1”,if the “AL2” less than “AL1” during setting process, then the

instrument will be returned back the factory setting, just to say,AL1=13,AL2=18.

Notes:

Please take out the batteries if the instruments without use for a long time. Put the probe in the air without touch

anything when zeroing, or the zeroing is not efficient. The penetrablity of this meter is strong.If the testing

materialis less than 50mm,please hang it over the air when measuring.