1.2012 NEW Pressure Compensation Device
2.High degree of protection
3.Easy to install
4.CE&RoHS
5.OEM service
Port: Ningbo/Shanghai
Minimum Order Quantity: 200 Unit/Units saip
Supply Ability: 50000 Unit/Units per Day saip
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Packaging Detail: Standard export packing
Delivery Detail: 3-7days
Pressure differentials in enclosures with a high degree of protection are a result of internal and external temperature changes. In the case of negative pressure or partical vacuum, dust and humidity can enter the enclosure through the door seal. When the air inside the enclosure cools down, condensation may occur because the humidity cannot escape the enclosure. The easy-to-install pressure compensation device DA 284 provides compensation of pressure at a protection degree of IP66. Even with a slight overpressure, a waterproof membrane inside the plug allows the humidity to escape whilst blocking water and dirt from entering the enclosure.
| Mounting | thread M40 x 1.5 with nut | ||||
| Torque | 5Nm (max. 10Nm) | ||||
| Depth in enclosure | approx. 16mm | ||||
| Material | plastic, light grey | ||||
| Sealing | sealing gasket NBR | ||||
| Filter | waterproof membrane | ||||
| Air permeability | 1200l/h at a pressure difference of min. 70mbar | ||||
| Dimensions | Ø 60 x 37mm | ||||
| Fitting position | variable | ||||
| Operating / Storage temperature | -35 to +70°C (-31 to +158°F) | ||||
Installation: Make cut-out +0.5mm in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure.
| Art. No. | Protection type | 1 packing unit | Weight (approx.) |
| 28400.0-00 | IP66 (EN 60529) / IPX9K (EN 40050-9) | 2 pieces | 90g (45g/piece) |
| 28400.0-01 | IP66 (EN 60529) / IPX9K (EN 40050-9) | 1 piece | 45g |
Model No.: JC-10
Features: small digital temperature display
1. LED display
2. 1pc NTC sensor
3. Power supply: 7.5 - 12V
4. 15 months warranty
Model No.: C4101
Features: C4101/ multi functional programmable process controller
1Sensor Type:PT100;thermocouple J,K,T,N,S;0-5V;4-20mA;0-50mV
Model No.: TH64A
Features: Large LED temperature humidity display unit
1.Operation condition:-10~60C,20%~80%RH
2.Relay output
Model No.: MST10R
Features: temperature transmitter
1)Economic variant
2) Two buttons on unit
3) Mini_USB Interface
4) eHART-Interface
Model No.: JC-70 series
Features: Temperature record
1. Compressor start delay
2. Alarm at temperature overlimit
3. temperature record in 30 days
Model No.: JC-71 series
Features: Temperature controller
1. ISO, TUV, ROHS
2. Alarm at temperature overlimit
3. temperature record in 30 days
Model No.: JCW-F**HV
Features: temperature controller for freezing cabinet
1. Manufacturer
2. ISO9001
3. Temperature range by customer
Model No.: wzp
Features: 1.material:304/316/321SS
2.wire material:2m silicon wire
3.probe diam:3mm
4.length:150mm
5.certification:ISO9001-2008/CE
Model No.: WZP-802
Features: 1.tube material:304SS/316SS/316L
2.tube size :8*100mm
3.thread:M27*1.5
4.temperature :0-400C
5.certification:ISO9001/CE
Model No.: JC-301
Features: digital temperature controller
1.for heat system
3. heater and lamp control
4. parameter is adjustable
5. CE, ROSH, TUV, CQ
Model No.: RTxxx
Features: RTXXX SERIES/USB TEMPERATURE DATALOGGER
1 CE,CB
2 recorde the temperature ,humidity ,pressure
Model No.: JC-833
Features: Digital temperature controller for heat system
1. Range of temperature control: -10 ~ 199 C
2. 1 NTC input
3. 2 relays.