1.creep testing machine used testing creep properties,creep rupture strength on ferrous metal,nonferrous metal.
2.Load 30-200KN
Port: Qing Dao
Minimum Order Quantity: 1 Set/Sets creep testing machine is available
Supply Ability: 100 Set/Sets per Day
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: wooden case
Delivery Detail: within 7 working days after the confirmed order
2012 Most Sale RC Dead Weight Digital Display High Temperature Creep Testing Machine
Applications:
Creep testing machine is designed and built for testing the creep properties and creep rupture strength on ferrous metal, nonferrous metal and their alloy that subjects to constant tensile load at a certain temperature at the specified time interval. It is designed according to “ high temperature creep & rupture strength GB/2039-1997” National Standard. Meanwhile, it conforms to ISO204/1997 International Standard and HB5151-96 Aviation Industrial Standard. It can offer liable test/inspection certificate for aviation Industry & other special materials property that should endure high temperature.
Specification:
1.Capacity: Model RC-30: 30KN; Model RC-50: 50KN; Model RC-100: 100KN; Model RC-200: 200KN
2.Load range: 2-100% FS
3.Load accuracy: ≤±1.0%
4.Variation of indicating load value: ≤±1.0%
5.The eccentricity of the upper and lower chucks: ≤10%
6.Min dead weight load: 1N
7.Automatic level range: ±0.1mm
8.Lever ratio: 1:50 / 1:100
9.Lower tensile rod speed: 0-50mm/min
10.Lower tensile rod stroke: 0-150mm for RC-30 and RC-50; 0-200mm for RC-100 and RC-200
High temperature furnace & Temperature-controller
1.Working Temp. range: 400°C~1200°C
2.Length of effective soaking zone: 150mm
3.Furnace pipe & electric furnace size:
4.Furnace pipe: φ90mm (Inner Dia.)×400mm (L),
5.Furnace: φ300mm (outer Dia,)×420mm (L);
6.Furnace life: ≥3000hours (Constant working time less than 1000°C)
7.Furnace Temperature accuracy (°C):
Test Temperature | Temperature fluctuation | Temperature gradient |
≤600 | ±2 | 2 |
>600~900 | ±3 | 3 |
>900~1200 | ±4 | 4 |
8.Measure & Control temperature meter: digital display, sensitivity: 0.1°C;
9.Auto compensation error of cold end:≤0.5°C;
10.To be matched freely with thermocouple.
11.Moving speed of lower grip holder
12.Speed range: 0.005~50mm/min;
13.Error: ±0.5%
14.Timing error: ±0.2%