Portable Hardness Tester
1.Large LCD display with back light
2.High accuracy +/- 0.5%
3.Conforming to ASTM A 956 Standard
Port: qingdao
Minimum Order Quantity: 1 Set/Sets portable hardness tester sample is avaliable
Supply Ability: 200 Set/Sets per Day
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: wooden case or boxes
Delivery Detail: 7 days after the confirmed order
DHT-100 Portable Hardness Tester
Features
Large LCD display with back light
For most metals
Based on the hardness HL value, conversion can be performed to HRB, HRC,HV,HB,HS and Tensile strength
Impact devices D DC DL C D+15 and G are available for special applications
Test at any angle, even upside down
RS 232 output and internal memory in a bath of 1250 average readings
Date and time display
Lower and upper limits setting with low-high display judge
High accuracy +/- 0.5%
Works on 4 standard AAA batteries
Auto shutdown after two minutes
Conforming to ASTM A 956
Technical Specification
Measuring Range / Materials | See table 1 |
Tensile Strength UTS range (steel only) | from 370 to 2000 (106 N/mm ) |
Hardness Parameter | HL, HRC, HRB, HV, HB, HS |
Optional Impact Device | DC / D+15 / DL / C / G |
Display functions | Scale, Hardness Value, times, average indicator and average value, impact direction, type of impact device connected, memory. reference, date, time,battery power consumption |
Display | 128 x 64 LCD display with back light |
Accuracy | +/- 0.5% (at HLD=800) |
Memory | 1250 group |
Output | RS 232 |
Testable workpiece | Thickness coupled: Minimum 3 mm or more (Except with Impact device G:10mm) Mass: 5kg or more (2-5kg on solid support ,<2kg with couplant paste) Surface roughness: Ra 10 Radius (convex/concave): Rmin=30mm or more (<30mm with support ring ) |
Test Points | 5mm or more from the edge of the sample, 3mm or more to each of the tested points |
Battery type | 2 AAA alkaline, 1.5V |
Operating temperature | -20 ~ +50 |
Dimensions | 108mm 62mm 25mm |
Weight | 230 grams (including impact device) |
Table 1 (For impact device D)
Materials | HL | HRC | HRB | HB | HS | HV |
ST & Cast ST | 300~890 | 19.8~68.5 | 59.6~99.6 | 80~651 | 26.4~99.5 | 83~976 |
CWT Stell | 300~840 | 80~898 | ||||
Stainiless | 300~800 | 20.4~67.1 | 85~655 | 85~802 | ||
GC Iron | 444~650 | 46.5~101.7 | 140~334(30 D2 ) | |||
NC Iron | 416~658 | 19.6~62.4 | 140~384(30 D2 ) | |||
Cast Alum | 200~560 | 30~159 (10D2 ) | ||||
Brass | 200~550 | 13.5~95.3 | 40~173 (10D2 ) | |||
Bronzes | 300~700 | 60~290 (10D2 ) | ||||
Copper | 200~690 | 45~315 (10D2 ) |
Standard Delivery
Main Unit
Small supporting ring
Impact device D
Two AAA batteries
Test block with HLD-value
Software and Cable
Carrying case
Operation manual
Cleaning brush
Leather wrist strap
Certificates