Compression Testing Machine
1.Compression capacity: 2000KN
2.Precision: 1%
3.Max. vertical clearance: 310mm
Port: Shanghai/Ningbo
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 20 Set/Sets per Week
Payment Terms: L/C,T/T,negotiable
Contact SupplierPackaging Detail: Standard export wooden case with polyfoam inside
Delivery Detail: nomally 20 days upon receipt 100% remittance
Application: the compression testing machine is to perform compression tests upon building materials including concrete, cement, airbrick, fire proofing tile, engineering ceramics and building stones.
Technical specification:
Model | STYE-2000D |
Load Capacity | 2000KN |
Precision | ±2% |
Max. vertical clearance (mm) | 310 |
Max. horizontal clearance (mm) | 260 |
Size of the bearing plate (mm) | 320×260 |
Max. ram travel(mm) | 300 |
Diameter of the piston(mm) | 250 |
Rated pressure of the hydraulic pump | 40Mpa |
Rated power | 750W |
Working voltage | 380V±10% or 220V±10% |
Dimension(cm) | |
Weight(kg) | 800 |
Choice of standard specimens:
1.100, 150 and 200mm cubes
2.150x150x550mm and100x100x100mm concrete beams
3.40x40x160mm mortar prism
4.70.7x70.7x70.7mm mortar cubes
5.Specimens of arbitrary section
Features:
1. Hydraulic loading;
2.Test results to be read from the analogue gauge.
3. Max load memorized and power off protection;
4. The lower platen marked for the location of cube and cylinder specimens, the ball-seated upper platen is able to tilt in all directions.
5. Rigid frame provides maximum stability, columns and bearing plates are very thick, so weight of loading frame is 200kg heavier than similar products from other manufacturers.
Package: Packed in standard wooden case.