1.Measuring Range: 0-150mm/0-6in
2.Material:stainless steel (4cr13)
3.Four-way measurements
4.certificate:CE
5.Display: LCD
Port: Shanghai or Ningbo
Minimum Order Quantity: 1000 Piece/Pieces
Supply Ability: 100000 Piece/Pieces per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: outer box size: 48*27*32 cmquantity:50pcsG.W/N.W:19/17 kgs
Delivery Detail: 30 days after deposit receiving.
150mm/6" New Style Electronic Digital Vernier Calipers (E015)
SPECIFICATIONS
1.caliper length:23.6cm
2.N/G.W: 17/19kg
3.material:4cr13
TECHNICAL SPECIFICATIONS
Outside Jaws: Measure External Length
Inside Jaws: Measure Internal Length
Measuring Range: 0-150mm/0-6in, 0~200mm/ 0~8 in
Resolution: 0.01mm/ 0.0005in
Accuracy: ± 0.02mm/ 0.001in (<100mm)
±0.03mm/0.001in(>100-200mm)
Repeatability: 0.01mm / 0.0005in
Max Measuring Speed: 1.5m/sec, 60in/sec
Measuring System: Linear Capacitance measuring system
Display: LCD Screen
Material: Stainless Steel(4CR13)
Power: One alkaline lithium button cell battery 1.5v,TYPE LR44.
Capacity-180MAH
Working Temperature: 5°c-40°c/41 to 104 degree f
Note: Accuracy affected in environments exceeding 80% relative humidity.
APPLICATIONS
1.Operation : slider can be removed only after the locking screw (#10) is loosened.
2.Basic measuring methods :
1) loosen the locking screw
2) Press "ON " button, select sae or metric measurement by pressing "MM/INCH" button.
Pressing "MM/INCH" button after measurement will display the sae / metric conversion.
3) To reset display to zero, close external measuring jaws, then press "ZERO" button.
MAINTENANCE INSTRUCTIONS
1. Keep the calliper clean and dry (liquid can damage the slider)
2. Use a clean, dry cloth to clean all surfaces -do not use solvents or solvent based cleaners.
3. To save power, turn off the unit when not in use.
Avoid contact with electricty and /or electronic devices
BATTERY REPLACEMENT
Flashing display indicates low battery. To replace battery, remove battery cover by sliding cover in
the direction indicated and replace battery with positive side facing out.
| Falure | Cause | Measure |
| Display flashes | Low battery | Replace battery |
| Display does not change when slider is moved | System locked | Remove battery and replace after 30 seconds to reset system |
| Accuracy less than +/-0.001mm | Dirt in the sensor | Remove slider cover and its assembly, clean with compress air 5kgs/cm2 |
| No display on LCD | 1. improper battery position 2. Low battery | 1. Remove battery cover and check battery position 2. Replace battery. |
Model No.: ZT
Features: Four way measurements (inside, outside, step and depth)
Model No.: ZTZX
Features: Feature:
1. with small lock system
2. with a fixed scale and a sliding scale
3. made of stainless steel
Model No.: CHYBKC
Features: Specially designed for measuring gear thickness
The products are according with GB/T1214,DIN862
Model No.: KSSNGC
Features: Specially designed for measuring inside groove which is hard to reach
Model No.: KS
Features: 1.The products are according with GB/T1214.2,DIN862
2.Four way measurements (inside, outside, step and depth)
Model No.: ZTGDWT
Features: Specially designed for measuring height
Model No.: ZTXS
Features: Specially designed for students
Model No.: ZTSD
Features: Just measure depth
Model No.: KSWT
Features: Four way measurements (inside, outside, step and depth)
Model No.: 601-0150FC
Features: 6"/150mm DIGITAL CALIPER
*Stainless steel,with metric/inch
*Reading: 0.01mm / 0.0005 inch/1/64 inch
Model No.: 601-0150FC
Features: 6inches/150mmDIGITAL CALIPER(VERNIER CALIPER)
*IP-54 water proof.*Stainless steel, with metric/inch & inch-FRAC system
Model No.: 131-0222
Features: IP65 Water-Proof Digital Caliper
1)Four-way measure
2)CE,ISO9001:2008
3)Zero setting/Metric-inch
4)Data Output/Remenber func