12PSB-IIIA Injection Pump Test Stand - 12PSB-IIIA

12PSB-IIIA Injection Pump Test Stand is our new design and development test bench. It is controlled by digital meter. The rotation speed, count, temperature, advanced angle are displayed by the digital meter. It has the characteristic with low noise, energy saving, operate easily, steady performance, perfect function.

Introudction: Test diesel mechanical pumps, such as in-line pump, rotary pump and distribution pump and so on.

Main Function:

1. Measure each cylinder's oil supply capacity at various rotation speed

2. Measure Test each cylinder's injection time with static state

3. Checkingt the mechanical speeds governor

4. Test electromagnetic valve of distribution pump

5. Check pressure compensator

6. Checking of the pneumatic speed governor's vacuum performance

7. Test the oil-return quantity of distribution pump

8. Test inner pressure of distributor pump.

9. Test the sealing performance of injection pump

10. Checking of the advance angle of advance device

Technical parameters:

1. Rotary speed: 0~4000RPM

2. Graduated cylinder: 45cc,150cc

3.Volume of diesel fuel tank: 60L

4.Temperature autocontrol: 40±2°C

5.Filter oil pricision of test bench(μ): 4.5~5.5

6. D.C. Supply: 12V/24V

7. Feed pressure: 0~0.4Mpa(low); 0~4Mpa(high)

8. Air pressure(Mpa): -0.03~0.3

9.Volume of motor oil tank: 40L(optional)

10.Measuring range of flowmeter(L/m): 10~100

11.Flywheel inertia ((kg*m): 0.8~0.9

12.Center height: 125mm

13. Electricity Supply 380V 50HZ 3 phase or 220V 60HZ 3 phase

14. Output power: 7.5KW, 11KW, 15KW, 18.5KW, 22KW or as request.